OSOBY RPVH120 RPVH120 Grube
$7.550-199 Piece/Pieces
$7.1≥200Piece/Pieces
Rodzaj płatności: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
transport: | Ocean,Land |
Porta: | SHANGHAI |
$7.550-199 Piece/Pieces
$7.1≥200Piece/Pieces
Rodzaj płatności: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
transport: | Ocean,Land |
Porta: | SHANGHAI |
Model No: YZPST-RPVH120/1-22K±5%
Marka: Yzpst
Miejsce Pochodzenia: Chiny
Resistance /Ω: 1--1M
Allowable Deviation: ±5%
Temperature Coefficient: ±250ppm/℃(25-85℃)
Maximum Working Voltage: 1500V DC
Insulation Withstand Voltage: 5KV DC 1min
Distributed Capacitance: <45pF
Insulation Resistance: >10GΩ
Range Of Working Temperature: -55℃-+155℃
Jednostki sprzedaży | : | Piece/Pieces |
RPVH120 Grube rezystory filmowe
Zakres:
Ta specyfikacja określa ogólne cechy i wymagania dla rezystorów folii RPVH 120 typu mocy.
Wymiary : Nazwa rozmiaru: MM Typ pakietu: SOT-227
Struktura rezystora :
Standard referencyjny :
GB/T 5729-2003 Stałe rezystory dla urządzeń elektronicznych Część 1: Ogólna specyfikacja
GB/T 2828.1-2012 Procedura pobierania próbek i próbka inspekcji partii po partii
Główne parametry techniczne :
Rated power |
When the base plate temperature is ≤70℃, the rated power is 120W |
Resistance /Ω |
1--1M |
Allowable deviation |
±5% |
Temperature Coefficient |
±250ppm/℃(25-85℃) |
Maximum working voltage |
1500V DC |
Insulation withstand voltage |
5KV DC 1min |
Distributed capacitance |
<45pF |
Insulation resistance |
>10GΩ |
Range of working temperature |
-55℃-+155℃ |
Główne elementy kontroli, metody kontroli i wymagania dotyczące wydajności:
project |
Test conditions |
Performance requirement |
Terminal strength |
Soft lead pull: 10N, stud type 1.0N.m torque |
ΔR≤±(1%R+0.05Ω) |
high frequency vibration |
Frequency 10~500Hz, 10g, 6h |
ΔR≤±(1%R+0.05Ω) |
overload |
Apply 1.5 times the rated power voltage for 10s |
ΔR≤±(0.4%R+0.1Ω) |
Room temperature durability |
The rated power load is 1000 h, and the bottom plate temperature is less than 70 ℃ |
ΔR≤±(5%R+0.05Ω) |
Metoda i wymagania instalacji chłodnicy
Rezystor jest instalowany na chłodnicy ze śrubami 2 M4, a moment instalacyjny jest mniejszy lub równy 1,3 nm (w celu zapewnienia użycia mocy i doskonałego rozproszenia ciepła);
Powierzchnię kontaktową należy wyczyścić;
Płaskość chłodnicy wynosi: 0,05 mm-0,1 mm (w zakresie 100 mm); Chropowatość chłodnicy musi wynosić 6,3цm;
Aby poprawić przewodność cieplną, powierzchnie kontaktowe (glinu, ciepło) należy pokryć tłuszczem silikonowym.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.